Axvme 1001
Single board computer with SH-4A

Axvme 1001 is a VME bus board equipped with an SH – 4A extended SH7785 core of Renesas Technology Corporation. The SH7785 has a maximum operating frequency of 600 MHz, and has realized a drastic improvement in performance compared with the conventional type such as supporting large capacity cache and DDR 2 memory.
In addition to equipping the PMC slot for PCI type IO expansion, Axvme 1001 prepares a general purpose IO slot that uses the SH local bus and easily and flexibly extends the custom IF module by FPGA programming It will be possible.
The VME bus master / bus slave function is implemented, and it is possible to select CF connector mounting type and SD connector mounting type as external media.
Specification
CPU |
SH7785 (SH - 4 A Enhanced CPU core) Maximum operating frequency: 600 MHz |
Local memory |
NOR Flash: 8 MB × 2 DDR 2 SDRAM: 256 MB |
FPGA | Xilinx Spartan-3AN |
Removable disk |
● Axvme 1001 - CF CF socket Type I mounted (True IDE mode) ● Axvme 1001 - MMC SD card connector (MMC) mounted |
Ethernet |
1 ch 10 BASE - T / 100 BASE - TX RJ 45 Intel LU 82551 ER |
RS232C | RJ 45 |
VME bus |
Bus standard: conforming to VME bus Revision C. 3 Bus width: A32 / A24 / A16 D32 / D16 / D08 (EO) |
Expansion bus (optional) | Equipped with the following two kinds of mezzanine slots PMC: 1 slot (PCI 33/32 bit) General purpose IO slot: 1 slot |
Other Hardware specification |
CPU RUN / ERR Switch: CPU reset, 8 bit DIP switch Reset IC (power supply down detection) Real time clock Power supply: 5 V Temperature: Operating: 0 to 50 ° C, Storage: -20 to 70 ° C Humidity: 20 ~ 80% RH Board size: 233.35 mm × 160 mm VME 6 U single slot width |
Software specification |
Boot Loader: u-boot OS: Linux, iTRON (Boot from either CF or MMC or onboard Flash) BSP: Driver, sample program |